Home  |  Downloads  |  Career  |  Site Map
 
 
 
 
      
METECHNO
> Products & Services  > Insulated Metal Roofing  > Metechno  
 
   

Monowall

Self-supporting metal panels insulated with PUR for use in industrial and commercial buildings, refrigerated rooms with positive temperature, and partitions in general.
For additional technical information, refer to the MONOWALL® technical manual.

TABLE OF SAFE SPANS
Values guaranteed with steel sheets as thick as indicated. Spans l in metres, as a function of a uniformly distributed load p (daN/m2), have been obtained from experimental data and calculated to provide a deflection limit: f <=l/200 of the span and a minimum safety coefficient that complies with the UEAtc standards for insulated panels.


Super Wall

Self-supporting metal panel system, insulated with rigid PUR foam, with a concealed-fixing method for high quality industrial and commercial buildings, where good aesthetics are paramount. The special double labyrinth joint of this panel, provides mechanical resistance and insulation superior to any other wall panel product of this kind, the panel external micro-V increases the aesthetic appeal of this panel, which can be orientated both vertically and horizontally as required.
Because of the particular shape of the joint, blind fastening are applied to the V-cut on the male edge of the outside sheet. Two screws with center distance of 30 mm should be used for each panel and each stud. Outside walls are made mounting such panels one next to the other.


MAJOR PRODUCT TECHNICAL APPROVAL:

Zulassung DibtZ -10.4 -169.

Note well: SUPERWALL ML thickness 60 can be used together with H-WALL" 8P thickness 50.
It is possible to build buffer walls of a high decorative value, thus creating special effects obtained from the combination of different thickness and colors.

Make sure that the load capacity of the two panels is correct using for the calculation the capacity values indicated forthe SUPERWALL1 ML panel.

 

Glamet

Self-supporting metal panel, insulated with polyurethane, for pitched roofs with a minimum slope of 7%.
For additional technical information, refer to the GLAMET® technical manual.
Major product technical approval: Zulassung Dibt Z - 10.4 - 241.

Table of safe spans

Values guaranteed with external face in steel, 0.5 mm thick, and internal face in steel, 0.4 mm thick or with both faces in aluminium 0,6 mm thick with external face in aluminium, 0.6 mm thick, and internal face in steel, 0.5 mm thick.

The spans l (m) as a function of a uniformly distributed overload p (daN/m2), have been obtained from load tests carried out in Metecno laboratories, and provide a deflection f <= l/200 with a safety coefficient that complies with the UEAtc standards for insulated panels, which have been established and are implemented by primary European Certifying Organizations.

With external and/or internal steel thicknesses inferior to the above mentioned ones, the guarantee on the admissible loads for the spans indicated in the table is maintained, while it is not maintained on the deflection limit and the safety coefficient.

   

Monoroof

Self-supporting metal panel, insulated with PUR-insulation, for pitched roofs with a minimum slope of 7%.
The internal side of the panel has a surface finish made from Centesimal Aluminium.

TABLE OF SAFE SPANS
The spans l in metres, as a function of a uniformly distributed overload p (daN/m2), have been calculated to provide a deflection f <= l/200 considering only the sheet as the resisting cross-section (the contribution of the polyurethane has not been taken into account) in accordance with standard UNI CNR - 10022/84 and the AIPPEG design guidelines.
Data for the 0.5 mm thickness sheet has been obtained from laboratory tests.

   
     
     
Profile Profile Gandhi Chhaya, Opp Sarvoday Hospital,
LBS Road, Ghatkopar west, Mumbai 400086.
Tel: +91 22 25104309
Fax: +91 22 25122522
Email ID : info@roofsandceilings.com
Clientele Vision & Mission
Career Quality Policy
Site Map Safety Policy
Enquiry Testimonials
 
All rights reserved. Roofs and Ceilings
Powered by : 3A India